Long-lasting work tools are essential within your work station if you need to handle serious projects with less difficulty. Getting the best tools (ones that work according to your preference) is a stressor. Trust me! More so, if you are new in DIY projects, you can end up buying something that will not fulfill your requirements. It is boring!
However, table saws are fundamental in performing a series of tasks in construction and woodworking. They come in different sizes and shapes, with their main target being a study and a portable structure and such.
But one thing to put in mind is that the necessity of a power tool never changes. Whether you are an amateur or you are just starting it as a hobby. You cannot survive without a table saw!
So if you want to avoid all the endless challenges, we have a short review of Bosch 4100-09. Immediately you pop your eye on this eye-catching table saw, you will experience a sigh of relief. It is a reliable work tool built with high-quality materials. What’s more, its great performance, stability, great performance, and portable in size has raised the bar.
Hence, rather than spending time and money on different products, the hard work has been done for you. The results are presented for you to revise. Doesn’t that sound better? It sounds, right? More so, the conclusions are clear without a hidden agenda.
BOSCH table saw
Bosch 10-Inch Worksite Table Saw 4100-09 Portable Table Saw
DEWALT Table Saw
DEWALT (DWE7491RS) 10-Inch Table Saw, 32-1/2-Inch Rip Capacity
DELTA table saw
Delta Power Tools 36-6022 Jobsite Saw, Black
BOSCH Table Saw
Bosch Power Tools 4100-10 Tablesaw - 10 Inch Jobsite Table Saw
SKIL Table Saw
SKIL 3410-02 10-Inch Table Saw with Folding Stand
Consequently, you can check out and discover more about this beast. Will it meet your expectations and standards or not? We have an answer for you! But we saw it better if you find it out personally. Will you?
Bosch delivers exactly what it promises with zero drawbacks and any major flaws. Of course, there are few minor glitches when using it: but there is no way the minor glitches can affect the overall performance of the table saw.
On the other side, the attention detail and special features on this tool. It is solidly built with a wide range of work with enhancing attachments to make your work easier. Bosch 400-09 has a strong, relatively quiet, and a solid motor. With good care of the motor, it will last for a long time.
It offers a wide variety of features with reduced installation requirements straight out of the box. It comes with a genius design folding stand and it is merged with treaded wheels to make easy movement within the Jobsite. With its small profile, you can easily fold it and pack it at the back of your pick up with less space consumption.
Honestly, this quality table saw comes with minor issues. It has a device called a hard-anodized coating. Therefore, if you want a saw good enough to create room for maximum performance at an affordable price, this is the best option.
This amazing work tool gives a great ton of service to both professionals and new users. The best thing that has caught the attention of many users about this unit is the portable design. If you want a top mobile and lightweight unit, then don’t hesitate to place your focus on Bosch 4100-09. It is the best!
As far as the price, safety, and precision are concerned, this unit is good. You might think that it is expensive but the Bosch Company has made everything easy for you. The company has ensured that this product is accessible even to the budget-savvy people.
This table saw also comes with an innovative gravity-rise stand that makes it a perfect tool for all construction works, regardless of the workspace. You can roll it on the wheels if you are running out of space within a short time. Fatigue is never an issue to complain of when 4100-09 trends in the market.
A big thanks to the manufacturer of this eye-catching work tool. It has a 40-tooth blade made of carbide. This is essential in cutting soft types of woods and boards. Bosch 4100-09 can also rip across hardwoods. Being made of durable aluminum material, your future repair costs are greatly eliminated.
In terms of durability, the materials used in building this table saw are reliable to ensure it lasts for a long time to save you from future repair expenses. The accuracy level is ranked top meaning you will not encounter issues with the precision on this tool. If you are a beginner, everything has been made easier for you. You can use the user manual for reference.
Compared to the worthy competitors, Bosch 4100-09 has a 15-amp motor that delivers impressive power. Even though there are other light options that you can consider, more portability comes from the use of wheels.
As far as safety is concerned at the work station, this table saw comes with a few basic safety elements such as the anti-kickback system and the blade guard. Kickbacks are the main causes of injuries when using this table saw. The good news is, this unit comes with an anti-kickback system that prevents this problem from happening.
It has an integrated smart guard device that performs wonders to prevent any accident. This device protects processed materials from getting damaged.
More so, the blade guard is neat and it is vital when it comes to keeping you safe and sound. Bosch 4100-09 also features a huge on/off button that is convenient for additional safety at the work station. Don’t work worried that you will get injured.
This amazing work tool has a dust-collecting port that is located away from the user’s way. Therefore, you should not worry about unpleasant experiences that come from unwanted sawdust flying all over the place.
Although it has a good collecting port, you will still expect some little debris flying around your work area. But that should not be a stressor. You can use safety goggles to protect your eyes from the harmful effects of wood dust.
It has a cooling fan that offers additional dust collection ability although it has no filter, you cannot be guaranteed of 100% dust collection.
The best thing we liked in this Bosch 4100-09 is the wheeled base design. Rather than carrying the table saw from one place to another within the workplace, you can simply roll it using the wheels. You will realize that it is vital at the end of the day when fatigue will be building up.
Secondly, we liked this unit as getting its accessories and spare parts is quite easy. By the way, many well-equipped hardware stores have most of the required accessories for this worksite table saw.
Some households claim that its price is disadvantageous because it is a bit expensive compared to other models within the same group. But do you want to know why it is pricey? It comes from Bosch Company which ranks among the top and well-respected Companies globally for producing heavy-duty tools. Therefore, basing your consideration of the brand’s reputation, this product is extremely affordable.
We loved it also because it has a square lock rip fence that is well-engineered to add more cutting ability allowing you to operate it using one hand. You can glide along the trail and anti-kickback pawls for protection just in case a kickback occurs.
As you can guess, few things have not given us satisfaction with Bosch 4100-09. One of the things that bored us with this table saw is the dust collector. We expected it to perform perfectly. Instead, at some point, the collector could not perform as expected some debris could still be observed around the work area.
The miter gauge is not solid too. Although this is a short term problem. However, that lack of sturdiness of the miter gauge can cause excessive noise. Imagine working from morning to evening with a noisy table saw, it bores!
Some people claim that the state of origin is Taiwan. They say that they dislike this city in China. But we cannot consider that as a crucial point to consider. Yes, it is indeed manufactured in Taiwan, but you can be assured that the quality control in Taiwan does this job perfectly.
Also, what we didn’t admire about this beast is the tad little working area that it can offer. Most carpenters prefer saws with a wide work surface area probably because they deal with big projects. But that should not be a worry. You have to consider the quality of work done by the saw. If you check on the quantity, you are wrong!
Some frequent users also complain of the saw’s ripping capacity not being the best that works according to their preference. But the fact remains that it can be improved over time.
Having seen the advantages and the disadvantages of Bosch 4100-09, now let’s check a little bit on the overall experience. Bosch is an esteemed company and with that, all concentration has been drawn closer to detail.
Built with gravity-rise stand and wheels, this table saw is designed to your requirements and height. You can use it everywhere you want it and carry it in any place you want. It has no space limits.
The best part with it is the fact that new users and amateurs can use it with no complicated hassle. Furthermore, hobbyists admire its ease of use and amateurs prefer its accuracy and precision. Are you budget-savvy? Then this unit is perfect for you. It features an affordable price.
Overall, this work tool runs smoothly. Right from removing it out of the box, everything is organized perfectly. Considering its mobility, it’s just an issue of time before hitting or bumping something with the saw. It’s really to fix in case anything moves out of line. Simply twist screws here and there and there you go.
Investing your money on a heavy-duty unit is never trivial stuff. Ensure you go for the best while thinking of durability, mobility, and affordability. Fortunately, the Bosch 4100-09 offers three things. It’s perhaps ranked top among the best workplace table saws offered in the market.
It is quite safe, easy to use and most fundamentally, top-notch equipment for numerous reasons at a reasonable price. If you hate what you see, then it is vital to read the review. You can land at something of interest. As far as this unit is concerned, it can end up being something worthy that offers cost-efficient investment.
Consequently, despite the minor setbacks, this Bosch 4100-09 Jobsite table saw find a tool that delivers quality construction and good value design. It is perfect for all experienced enthusiasts and professionals as the overall positive feedback is constant.
This Bosch 4100, therefore, ranks the perfect table saw of its kind based on its cutting, safety, visibility, standards, and portability. Do you want to be left behind when people are making progress in their workplace? Hurry up while the stock lasts
Q: What’s the difference between the older 4100-09 model vs. 4100-10?
A: Let’s start with the Build quality;
Taking a close look at both table saws, the major difference is the weight. Bosch 4100-10 is a bit light and somehow portable. The difference is quite small. Perhaps you may not feel any change.
The new model 4100-10 has a 24-tooth blade compared to the 40-tooth blade that 4100-09. The new model has more frequent functionality in terms of rip-cutting. More so, it comes with some modifications in terms of the gravity-rise stand. The new stand allows you to easily load it in and off the truck. Although the difference is not technical.
Q: What is the width of the blade included?
A: As it is a trend with table saws, a blade fixed on the table saw should perform perfectly and leave the desired job. Bosch provides amazing blades that offer a great task. It features one of the great blades from Freud with a standard 5/8 inch arbor size. More so, this table saw has a 10-inch blade diameter with a 40-tooth carbide perfect for huge logs. Some other table saws come with larger diameter blade size which may fail to function according to your needs.
Q: What are the dust collection options?
A: Bosch 4100-09 offers an amazing work tool that has a dust-collecting port that is located away from the user’s way. Therefore, you should not worry about unpleasant experiences that come from unwanted sawdust flying all over the place.
However, although it has a good dust collecting device, you will still expect some little debris flying around your work area. But that should not be a stressor. You can also buy safety goggles to protect your eyes from the harmful effects of wood dust.
Nevertheless, it has a cooling fan that offers additional dust collection although it has no filter, you cannot be guaranteed of 100% dust collection.
Q: Where is the Bosch 4100 manufactured?
A: Bosch 4100 is a great saw from a big manufacturer. It has its origin country in Taiwan. More so, Bosch products are assembled in Taiwan in the republic of china. Since the year 1990, Bosch in Taiwan has been the leading manufacturer of building technology and automotive engineering. The company is fully committed to social responsibility to Taiwan society. The basis of this company towards its future development is based on its innovative strength.
Q: What is the max ripping capacity of the blade on the right and left?
A: The rip capacity of Bosch 4100-09 is 25 inches with a blade diameter of 10 inches. The ripping capacity is measured by the total distance the fence can travel and the distance from the saw. This product gives a rip capacity of 25 inches on the right and left which is perfect in ripping full-size plywood down to the middle. Sometimes a left tilt blade tilts away from the fence and can be less bind when preparing bevel cuts.
From everything highlighted in this Bosch 4100-09 review, we have indeed been speaking about a top-notch piece of job site equipment. Both professionals and newbies can appreciate its cool features, safety extras, and perfect design.
Never forget, the easy to carry from one point to the other as well as compact design that it offers. I highly recommend that it is the best worksite tool in its category with favorable prices. Could you give it a trial today? Good luck as you plan to buy yours.
James Robert is a 27 year old Blogger from the USA. He Started Beasts Tools to provide unbiased reviews in the form of Top 10 Lists.