Having a tool that can make work smooth and easier is every artisan`s wish. A saw is a hand tool for cutting wood or other materials usually in a backward and forward movement. It consists of a tough toothed-edge, which assists in cutting. To function, it can be powered or manual. Saws have been around for decades and vary differently. Miter saws are commonly referred to as drop saws and are used to make accurate crosscuts by pulling the blade down in a quick motion. Folks outside the States know it as miter.
What is a Miter Saw used for?
In woodworking, you will need various sets of tools to aid you. One obvious thing is you will need to saw your way through boards of all kinds. The Miter saw is also referred to as a drop saw and it specializes in making accurate crosscuts in quick motions. In situations where you are working with foot length boards, the Miter saw is more efficient for cutting down in smaller lengths.
Miter saw uses
The tool has various features for working differently to give a final product. The blade is used to produce angled cuts and quick cuts on door and picture frames. It is specialized such that it can cut a variety of angles. The saw is great for working through gigantic logs.
When in need of cutting a board in half, using a Miter is most suitable due to various reasons. The stability and power of the machine are useful in scenarios where you encounter a board that does not easily cut through. Some come with laser guides showing exactly where you need to start the cut hence no need of moving the handle to see where the blade will cut. Going for one with rails to aid in gliding smoothly over the surface compared to the other ones such as the radial arm saw hence helps you cut down on extra cost.
Turning the saw to one side of the other cuts. Some have larger range though limited by the blade size and length of cut. It is highly useful such that when handling projects that strictly use right angles everywhere it makes your work easier. Even when working on simple picture frames you have to Miter the corners hence, showing a Miter joint is highly important and common in building. When trimming, flooring or remodeling a house, a Miter saw is needed to complete the task and bring back the best results since all kinds of angles are cut.
Bevel Cuts and compound Angle cuts
This cut is made by moving the saw to the left of right and angling the path of the saw cut. The procedure is more useful for complex angles such as boards that have diagonally crossed over each other in two different planes. A Miter saw can easily make the bevel and angles cuts on boards with a wider surface than others. Even though getting the perfect cuts can be disheartening, do not despair shake off the fear and get to work. Nevertheless rare, be prepared by having the tool at your disposal avoiding the last-minute rush to the store!
Other than the factors stated above to keep mind when purchasing a Miter saw, there are also other things to consider when getting the tool to avoid being disappointed when your tool does not align with your available resources. Here are some few when thinking about its usefulness.
Cases, where you keep making the same cuts repeatedly with the same length, are common. To maintain this is by marking the stop to ensure you put small blocks as trademarks and start at the same point on your next project requiring the exact dimensions hence saving you time. Marking gives you the accuracy you need. The perfect tool for the job is a Miter saw rather than the hand or circular saw that can prove to be difficult and face accuracy issues. When doing this be extra careful especially with your fingers avoiding unnecessary injuries, saving you extra cost.
Some artisans prefer having their workstations. What fun way to make the area where awesome ideas take place than playing with the tools making the place look creative and interesting to work in? This gives it a friendly environment to work in. It also makes the place look neat and tidy. Not only saving space but also enables easy positioning of the boards held in place when cutting. Set the Mite saw below the surface of the workbench to save on space. This position enhances the functionality of the saw since it can work its way across the boards evenly.
The difference between this saw and other saws is the rails it has helping it glide easily over wood or the material worked on. An added advantage compared to the other varieties is its ability to accomplish what the others cannot with its 12-inch blade cutting through thicker material. They are preferable cutting fence posts and logs due to their powerful blade. Though relatively expensive, the worth is inevitable since it does more heavy duty as compared to the other ones. In cases where the stationary saw can accomplish the work at hand, save yourself the budget of getting the sliding saw.
Final verdict and Recommendation
Everyone desires to have happy customers or even satisfying completed tasks at home such as setting up that fence post or fixing the picnic table at the back. I recommend the Miter saw due to its accuracy and promising results. It is great for its useful nature making work easier for you whether it is working on regular boards or thicker lumber. Cuts are also desirable. According to tool stores data, the Miter is the most purchased tool. Worry not since it is relatively affordable. Say goodbye to your troubles! Get your saw and expect the best results with your work.